Recommended add-ons
TWO HELMETS. ONE BRAKE FREE.
2-PACK
HELMET MOUNT
"Got a pair so I can swap my Brake Free between my touring and track lid. Takes maybe three seconds. Holds rock-solid at 200 km/h on the highway."
— Ruben B., Den Haag
"My pillion now signals too. Stuck cleanly to her Schuberth in one try — no peeling after a wet winter."
— Aisha I., Rotterdam
"Low-speed drop last month. The mount released exactly like they say. Helmet shell untouched, light recovered, popped a fresh one on. Worth every cent."
— Tom K., Brussels
"Industrial 3M VHB is the real deal. I gave one to a friend with a vintage Bell — it stuck and it stayed."
— Lucas V., Eindhoven
As we always include one (1) Universal Mount with every Brake Free unit, this 2-pack is for riders with a second helmet, a passenger helmet, or simply as a spare for when the first wears out.
Fits: Full-face, open-face, and standard flip-up helmets with a typical rounded/curved backside.
Install: Installs in minutes. 3M VHB adhesive — bonds fully in 24 hours. No drilling, no modification, no compromise to your helmet's integrity.
Security: click-in locking mechanism. Tested at sustained highway speeds and dual-sport riding conditions.
Lifespan: Consumable by design and removable without damaging your helmet. When the locking edges lose their sharpness, installing a fresh mount is advised to reattain a secure mounting spot for your Brake Free unit.
Safety: 3M VHB is widely used acrylic-based foam adhesive which contains no softeners. It's considered an industry standard and is used by most premium motorcycle accessory manufacturers. It is 100% safe to use on any helmet finish (carbon, glossy, matte) and does not compromise your helmet's integrity.
The hardness of the plastic mount is intentionally soft to be both secure and safe. That way it will not create a pressure point in case of an accident.
98% of reviewers would recommend this product to other riders — Installs in minutes and securely holds the light.
Get notified when 2-pack // Universal Mounts is back in stock.
Fast EU Shipping | Easy InstallationReplace When Worn
As we always include one (1) Universal Mount with every Brake Free unit, this 2-pack is for riders with a second helmet, a passenger helmet, or simply as a spare for when the first wears out.
Fits: Full-face, open-face, and standard flip-up helmets with a typical rounded/curved backside.
Install: Installs in minutes. 3M VHB adhesive — bonds fully in 24 hours. No drilling, no modification, no compromise to your helmet's integrity.
Security: click-in locking mechanism. Tested at sustained highway speeds and dual-sport riding conditions.
Lifespan: Consumable by design and removable without damaging your helmet. When the locking edges lose their sharpness, installing a fresh mount is advised to reattain a secure mounting spot for your Brake Free unit.
Safety: 3M VHB is widely used acrylic-based foam adhesive which contains no softeners. It's considered an industry standard and is used by most premium motorcycle accessory manufacturers. It is 100% safe to use on any helmet finish (carbon, glossy, matte) and does not compromise your helmet's integrity.
The hardness of the plastic mount is intentionally soft to be both secure and safe. That way it will not create a pressure point in case of an accident.
More info
COMPATIBILITY
We provide a single universal and XL mount with each of our units. Together they allow for a secure installation on >95% of motorcycle helmets — including full, jet, adventure, and flip-up.
Every Brake Free unit ships with two mounts: a Universal Mount and an XL Mount. You get both — usually no extras to order unless you own a Shoei NXR2, RF1400, or Z-8 helmet. Then the type-specific mount is considered a mandatory purchase to achieve a correct fit.
3M VHB acrylic foam — the same adhesive used across motorsport and premium helmet accessories. No weakeners, no solvents. 100% helmet-safe. It bonds through vibration, heat, and sustained high speed without degrading.
Yes. The mount is engineered to hold at sustained high speeds and in wet conditions. Clean the surface correctly before fitting, press firmly for 60 seconds, and leave 24 hours before riding. Do that, and it holds.
No. Once bonded, the mount is fixed to that helmet. Removing it breaks the adhesive bond permanently. If you need a mount on a second helmet, order an additional mount.
No. The mount is made from the same soft plastic used in premium helmet comms, vents, and spoilers. It absorbs impact and grinds away cleanly — no pressure point, no structural risk to the helmet shell.
By design. The proprietary A-shape connection means crash vibration ejects the unit intentionally. It does not obstruct helmet rolling resistance — a critical safety requirement. The unit leaves the helmet; the helmet does its job.
The Universal Mount fits the vast majority of helmets with a reasonably flat or gently curved rear. For specific compatibility, use the Compatibility Lab on the website — enter your helmet and get a confirmed answer.
Yes. This is all the same helmet, just named different regionally. This particular Shoei helmet requires the type-specific Shoei mount for a correct fit. It is a mandatory purchase, not an optional upgrade. The Universal and XL Mounts included in the box will not achieve the right geometry on these models.
Yes — if a good mounting position exists. More original surface area in direct contact is always better than adding extra VHB layers. If more than 60% of the foam adhesive contacts the helmet surface, the bond is secure. Additional 3M VHB strips can fill gaps — email mailus@brakefreetech.eu for advice and supply.
Best to check the 'Compatibility Lab' on the site, and incase your helmet is not listed then contact us. Unlisted helmets are assessed 'case by case'. Email mailus@brakefreetech.eu with your helmet brand, model, size, and photos. We will confirm compatibility before you fit anything.
Start with the Compatibility Lab on the website. If your helmet is not listed or the result is unclear, email mailus@brakefreetech.eu with your helmet brand, model, size, and photos. Do not guess and fit — get a confirmed answer first.
Clean the mounting area with an alcohol swab to remove grease and oils. Let it dry fully before applying the mount. Skipping this step is the most common cause of bond failure.
Check the Compatibility Lab on the website — it tells you which mount is correct for your helmet. Both mounts ship in the box. Use the right one for your helmet geometry; do not default to one without checking.
Clean the surface with an alcohol swab. Peel the adhesive backing, position the mount, and press firmly for 60 seconds. Leave 24 hours before riding. Do not rush the cure time — the bond needs it.
Yes, provided enough adhesive contacts the surface. If more than 60% of the foam adhesive is in direct contact with the helmet, the bond is secure. Additional 3M VHB strips can bridge remaining gaps — email mailus@brakefreetech.eu for advice and supply.
Slide the unit into the mount until it clicks. To remove, press the release tab and slide it out. No tools required. Firm enough to hold at speed, simple enough to remove in seconds.
Email mailus@brakefreetech.eu before fitting. Share your helmet brand, model, and finish type. We will advise you directly. Do not apply the mount first and ask questions after.
Clip the Brake Free unit onto the mount first — it gives you a grip handle. Then rotate the mount back and forth in small increments. It rolls off progressively, leaving no residue. Do not peel or pull straight back.
Check the locking ridges — if they appear blunt or worn, test the bond by carrying the helmet by the unit with moderate shaking. Any movement means the mount needs replacing before your next ride.
No. Once the adhesive bond is broken, it is spent. A removed mount cannot be refitted. Order a replacement mount before your next ride.
Stop riding with it. Edge lifting means the bond is compromised. Replace the mount before getting back on the bike — do not ride on a partially bonded mount.
No. Mount-only products do not include a Brake Free unit. The unit is sold separately. If you need a complete setup, order the full Brake Free product — it ships with both the Universal Mount and the XL Mount included.
AI summary placeholder: this area will auto-update with a synthesized summary from Judge.me review content.
AI-generated summary from Brake Free rider reviews.
Recommended add-ons
